Copier Installation
D017/D018/D019/D020 1-12 SM
Toner Bottle
1. Raise the toner bottle holder lever [A], push lever [B] down, and pull the toner bottle
holder [C] out.
2. Shake the toner bottle [D].
Do not remove the toner bottle cap [E] until after shaking.
3. Unscrew the bottle cap [E] and insert the bottle into the holder.
Do not touch the inner bottle cap [F].
4. Reposition the holder and press down the holder lever to secure the bottle.
5. Open the right cover.
6. Rotate the green fusing pressure lever [G] to the up position.
To Next Page
Loading...
