LCT (B391)
D017/D018/D019/D020 1-22 SM
11. Rotate the adjuster [A] until the machine cannot be pushed across the floor.
12. Load paper into the paper tray and turn on the main switch.
SP Setting
1. Connect the copier and turn the machine on.
2. Do SP1914 to set automatic paper size detection for the LCT.
1914
3: Tray: Auto Paper Size Detection
1 Size 1: B5/Exe Landscape
2 Size 2: A5/HLT
3 A4/LT
4 A4/LG
5 A3/LT
[0 to 1/0/1]
0: ISO (A3, A4, A5, etc.)
1: USA (DLT, LT, EXE, etc.)
3. Exit SP mode.
4. Do some test copies to make sure that the machine operates correctly.
To Next Page
Loading...
