Paper Tray Unit (D331)
D017/D018/D019/D020 1-18 SM
11. Rotate the adjuster [A] until the machine cannot be pushed across the floor.
12. Load paper into the paper trays and set the side fences and bottom fence.
SP Settings
1. Connect the copier and turn the machine on.
2. Do SP1914 and SP1915 to set automatic paper size detection for the upper and lower
tray of the paper tray unit.
1914
3: Tray: Auto Paper Size Detection Upper Tray
1915
4: Tray: Auto Paper Size Detection Lower Tray
1 Size 1: B5/Exe Landscape
2 Size 2: A5/HLT
3 A4/LT
4 A4/LG
5 A3/LT
[0 to 1/0/1]
0: ISO (A3, A4, A5, etc.)
1: USA (DLT, LT, EXE, etc.)
3. Exit SP mode.
4. Do some test copies to make sure that the machine operates correctly.
.
To Next Page
Loading...
