Component Layout
D371 4 SM
2.1.2 DRIVE LAYOUT
1. Interchange Motor
2. Paper Exit/ Inverter Roller
3. Paper Transport Roller
4. Junction Gate Solenoid
5. Junction Gate Jam Sensor
The interchange motor drives the paper exit/inverter roller and paper transport roller
through the gears and timing belt. This motor exits paper to the 1-bin tray if it is installed
and 1-bin tray is selected as an output location. However, this motor also transports paper
to the duplex path if the duplex unit is installed and the machine gets a duplex job.
To Next Page
Loading...
