Motors
SM 11 D372
500-Sheet
Finisher
D372
1.3.5 FRONT FENCE MOTOR
Preparation
Disconnect the finisher.
Remove the finisher from the side of the machine.
Remove the transport unit
1. Remove the front fence motor [A] ( x1, = x2, x1).
1.3.6 FEED-OUT BELT MOTOR, REAR FENCE MOTOR
Preparation
Disconnect the finisher.
Remove the finisher from the side of the machine.
Remove the transport unit
1. Remove the feed-out belt motor mount [A] , ( x2).
2. Remove: