Installing Controller Options
SM 19 D383
Printer/
Scanner
Option
D383
1.3.3 BLUETOOTH UNIT (B826)
Accessories
Check the accessories and their quantities against the following list:
No Description Quantity
1 Bluetooth Unit B826 1
2 PCI Card 1
3 Cap 1
Installation
Turn off the main power switch and disconnect the power supply cord.
1. Remove the plastic application cover ( x1).
2. Remove the cover [A] of board slot ( x1).
3. Attach the interface board [B] to the controller board ( x2 knob screws).
Use a screwdriver to tighten the knob-screws. Do not tighten manually,
because this can disconnect the board.
4. Install the Bluetooth card [C] in the slot in the Bluetooth unit.
5. Insert the antenna [D] into the Bluetooth card.
6. Attach the antenna cap [E].
To Next Page
Loading...
