Installing Controller Options
SM 1 D383
Printer/
Scanner
Option
D383
1.3.5 GIGABIT ETHERNET (G831)
Accessories
Check the accessories and their quantities against the following list:
No Description Quantity
1 Gigabit Ethernet (G381) 1
2 Ferrite Core 1
Installation
1. Switch the machine off.
2. Remove the plastic application cover ( x1).
3. Remove the board cover [A] ( x 2).
4. Insert the Gigabit Ethernet Board [B] into the slot and fasten it with the screws.
5. Switch the machine on.
6. Print a configuration page to confirm that the machine recognizes the installed board
for USB2.0:
User Tools > Printer Features > List/Test Print > Configuration Page
To Next Page
Loading...
