Service Call Conditions
D017/D018/D019/D020 4-18 SM
device RAM is low. exhausted
Counter device defective
Key/card counter device error 4
635 B
After installation of the device a
message alerts user to a battery
voltage abnormal error.
Device control board defective
Device control board backup
battery defective
636 B OSM User Code File Error
The correct "usercode" file could not be
found in the root folder of the SD card
because the file is not present, or the
existing file is corrupted or the wrong type
file.
Make sure the eccm.mod
file is in the root folder of
the SD card.
Note: The usercode files are
created with the User Setting
Tool "IDissuer.exe".
641 D Engine-Controller Communication Error: Non-Response
There was no response to a frame sent
from the controller board to the engine.
Turn the machine power
off/on.
650 B Communication error of the remote service modem (Cumin-M)
Authentication error
The authentication for the Cumin-M failed at dial up connection.
Incorrect SP settings
Disconnected telephone line
Disconnected modem board
-001 -
Check and set the correct user name (SP5816-156) and password
(SP5816-157).
-004 - Incorrect modem setting
To Next Page
Loading...
