SP2xxx: Drum
SM 5-35 D017/D018/D019/D020
Service
Tables
Use this SP when you want to adjust the image density.
ID Sensor Control Correction
2933*
Adjusts the ID sensor control coefficient. DFU
[0.5 to 3 / 1 / 0.1/step]
2934* ID Sensor PWM Setting
1 Display Displays the PWM of the ID Sensor LED.
Upper Limit Correction
3
Corrects the upper limit of the PWM for the ID sensor LED. DFU
[0 to 255 / 50 / 1/step]
ID Sensor Initialization
2935
Performs the ID sensor initial setting.
Press Execute on the touch panel to start. Perform this setting after
replacing or cleaning the ID sensor.
Original PCU ID South Korea only
2989
Displays the ISSUER CODE of the loaded PCU. The history of the PCU ID
codes is stored in NVRAM for display.
1 Latest Most current code (in use).
2 Last 1
3 Last 2
4 Last 3
5 Last 4
Up to four issuer codes of toner lots in the same series can be
stored. If a PCU with a new series code is set, then the new code
replaces the history of the previous PCU.
2990
Original Toner ID South Korea only
To Next Page
Loading...
