SP5xxx: Mode
D017/D018/D019/D020 5-76 SM
RK 4: Setting Japan Only
5186
Enables or disables the prevention for RK4 (accounting device) disconnection.
If the RK4 is disconnected for 10 seconds when this SP is set to "1 (Enable)",
the machine automatically jams a sheet of paper and stops.
[0 or 1 / 0 / 1/step]
0: Disable
1: Enable
5188
Copy NV Version DFU
5195
Limitless SW DFU
5212 Page Numbering
3 Duplex Printout Left/Right Position
Horizontally positions the page numbers
printed on both sides during duplexing.
[–10 to +10/1 mm]
0 is center, minus is left, + is right.
4 Duplex Printout High/Low Position
Vertically positions the page numbers
printed on both sides during duplexing.
[–10 to +10/1 mm]
0 is center, minus is down, + is up.
Set Time DFU
5302
Sets the time clock for the local time. This setting is done at the factory before
delivery. The setting is GMT expressed in minutes.
[–1440 to 1440/1 min.]
JA: +540 (Tokyo)
NA: -300 (NY)
EU: +6- (Paris)
CH: +480 (Peking)
To Next Page
Loading...
