SP5xxx: Mode
D017/D018/D019/D020 5-136 SM
After the machine has entered energy saver mode or stand-by mode, the
machine slows the fan speed after this time runs out.
After the machine has entered the auto off mode or an error occurs, the
machine stops the fan after this time runs out.
[30 to 120 / 30 s / 1 s]
1 Normal
2 Energy Saver
Copy Server: Set Function
5967
Enables and disables the document server. This is a security measure that
prevents image data from being left in the temporary area of the HDD. After
changing this setting, you must switch the main switch off and on to enable the
new setting.
[0 to 1/1]
0: ON
1: OFF
Cherry Server
5974
Selects which version of the Scan Router application program, “Light” or “Full
(Professional)”, is installed.
[0 to 1 / 0 / 1 /step]
0: Light version (supplied with this machine)
1: Full version (optional)
Device Setting
5985
The NIC and USB support features are built into the GW controller. In order to
use the NIC and USB functions built into the controller board, these SP codes
must be set to "1" (Default: 1 Enabled)
1 On Board NIC
2 On Board USB
0: Disable, 1: Enable
To Next Page
Loading...
