SP6xxx: Peripherals
SM 5-141 D017/D018/D019/D020
Service
Tables
Stamp Position Adj.
6010*
Adjusts the stamp position in the sub-scan direction in fax mode.
[–5.0 to +5.0 / 0 / 1 mm/step]
Original Size Detection Priority
6016*
Specifies the original size for a size detected by the original sensor, since
original sensors cannot recognize all sizes.
(7) 0000 0000 (0)
Different bits are used for detection, depending on the location as shown
below.
Bit Size Location
7 A4 (L)/LT (L)
6 11" x 15"/DLT (L)
Japan only
5 DLT (L)/ 11" x 15"
4 LT (S)/ US Exec (S)
3 LT (L)/ 8" x 10" (L)
2 LG (L)/ F4 (L)
NA only
1 A4 (L)/ 16K (L)
0 8K (L)/ DLT (L)
EU/AA only
Sheet Through Magnification
6017
Adjusts the magnification in the sub-scan direction for the ARDF.
[-5.0 to 5.0 / 0 / 0.1 %/step]
Finisher Input Check
6117
Displays the signals received from finisher sensors and switches. (See the
tables below.)
To Next Page
Loading...
