SP8xxx: Data Log 2
SM 5-173 D017/D018/D019/D020
Service
Tables
Abbreviation What It Means
recorded in the SMC report.
Svr Server
TonEnd Toner End
TonSave Toner Save
TXJob Send, Transmission
YMC Yellow, Magenta, Cyan
YMCK Yellow, Magenta, Cyan, BlacK
All of the Group 8 SPs are reset with SP5 801 1 Memory All Clear, or the Counter
Reset SP7 808.
8001 T:Total Jobs
8002 C:Total Jobs
8003 F:Total Jobs
8004 P:Total Jobs
8005 S:Total Jobs
8006 L:Total Jobs
These SPs count the number of times each
application is used to do a job.
[0 to 9999999/ 0 / 1]
Note: The L: counter is the total number of times the
other applications are used to send a job to the
document server, plus the number of times a file
already on the document server is used.
These SPs reveal the number of times an application is used, not the number of pages
processed.
When an application is opened for image input or output, this counts as one job.
Interrupted jobs (paper jams, etc.) are counted, even though they do not finish.
Only jobs executed by the customer are counted. Jobs executed by the customer
engineer using the SP modes are not counted.
When using secure printing (when a password is required to start the print job), the job
is counted at the time when either “Delete Data” or “Specify Output” is specified.
A job is counted as a fax job when the job is stored for sending.
To Next Page
Loading...
