Overview
SM 6-9 D017/D018/D019/D020
Detailed
Descriptions
PCB SBU (Color)
Sensor Board Unit. Contains the CCD, and outputs a
video signal to the IPU board.
PCB SIU (Color)
Connects and interfaces between the IPU and the
SIO of the color scanner unit.
PCB SIO (Color)
Interfaces between scanner unit and BCU, controls
sensors and motors in the scanner unit.
PCB Lamp Stabilizer (Color) Stabilizes the power to the exposure lamp.
Solenoids
SOL1 Fusing Drive Release Releases the drive for the fusing unit.
Lamps
L Quenching Lamp
Neutralizes any charge remaining on the drum
surface after cleaning.
L Secondary Fusing Lamp Heats both ends of the hot roller.
L Main Fusing Lamp Heats the center of the hot roller.
L Exposure Lamp (Mono)
Monochrome scanner unit. Applies high intensity
light to the original for exposure.
L Exposure Lamp (Color)
Color scanner unit. Applies high intensity light to the
original for exposure.
Heaters
H1
Anti-condensation
(Option)
Turns on when the main power switch is off to
prevent moisture from forming on the optics.
H2 Tray (Option)
Turns on when the main power switch is off to
prevent moisture from forming around the paper
trays.
Others
CO Mechanical Counter Keeps track of the total number of prints made.
To Next Page
Loading...
