Shift Tray (D385)
D017/D018/D019/D020 1-34 SM
1. Remove all tapes.
2. Remove the plate [A].with nippers.
3. Install the large paper guide [B] and two small paper guides [C], as shown.
4. Install the stepped screw [A].
5. Install the shift tray unit [B], as shown.
Set the shift tray on the stepped screw.
The shift tray must be installed under the paper guide [C] installed in step 3.
6. Connect the cable [D] to the copier.
To Next Page
Loading...
