Bit Switches
D361 88 SM
Printer Switch 0E (SP No. 1-103-015)
No Function Comments
length to print all the received
lines without reduction is selected
first.
1
Paper size selected for printing A4
width fax data
0: 8.5" x 11" size
1: A4 size
This switch determines which
paper size is selected for printing
A4 width fax data, when the
machine has both A4 and 8.5" x
11" size paper.
2
Page separation
0: Enabled
1: Disabled
1: If all paper sizes in the machine
require page separation to print a
received fax message, the
machine does not print the
message (Substitute Reception is
used).
After a larger size of paper is set
in a cassette, the machine
automatically prints the fax
message.
Printing the sample image on reports
Bit 4 Bit 3 Setting
0 0 The upper half only
0 1
50% reduction
(sub-scan only)
1 0 Same size
3-4
1 1 Not used
"Same size" means the sample
image is printed at 100%, even if
page separation occurs.
User Parameter Switch 19 (13H)
bit 4 must be set to "0" to enable
this switch.
Refer to Detailed Section
Descriptions for more on this
feature.
5-6 Not used Do not change the settings.
7 Equalizing the reduction ratio among 0: When page separation has
To Next Page
Loading...
