Bit Switches
D361 124 SM
IP Fax Switch 03 (SP No. 1-111-004)
No. Function Comments
1: PPRx4 numbers.
When "1" is selected, the transmission
condition is based on the ITU-T method.
6
Shift down setting at receiving
negative code
0: OFF, 1: ON
Selects whether to shift down when
negative codes are received.
7 Not used Do not change this setting.
IP Fax Switch 04 (SP No. 1-111-005)
No. Function Comments
0-3 TCF error threshold
Sets the TCF error threshold level. [00 to 0f]
The default is "1111" (0fH).
4-7 Not used Do not change these settings.
IP Fax Switch 05 (SP No. 1-111-006)
No. Function Comments
Modem bit rate setting for transmission
(kbps)
Bit 3 Bit 2 Bit 1 Bit 0 kbps
0 0 0 1 2.4
0 0 1 1 4.8
0 0 1 1 7.2
0 1 0 0 9.6
0-3
0 1 0 1 12.0
Sets the modem bit rate for
transmission. The default is "0110"
(14.4K bps).
To Next Page
Loading...
