Video Data Path
SM 171 D361
Fax Option
Type 3350
D361
line.
Immediate Transmission
The base copier's scanner scans the original at the resolution agreed with the receiving
terminal. The IPU video processes the data and transfers it to the FCU.
When scanning a fax original, the IPU uses the MTF, independent dot erase and
thresholding parameter settings programmed in the fax unit’s scanner bit switches,
not the copier's SP modes.
Then the FCU stores the data in page memory, and compresses the data for transmission.
The NCU transmits the data to the line.
JBIG Transmission
Memory transmission: If the receiver has JBIG compression, the data goes from the DCR
to the QM-Coder. Then the NCU transmits the data to the line. When an optional G3 unit
(SG3) is installed and PSTN2 is selected as the line type, JBIG compression is available,
but only for the PSTN-2 line.
Immediate transmission: If the receiver has JBIG compression, the data goes from the
page memory to the QM-Coder. Then the NCU transmits the data to the line. When an
optional G3 unit (SG3) is installed and PSTN2 is selected as the line type, JBIG
compression is available, but only for the PSTN-2 line.
Adjustments
Priority for the line used for G3 transmissions (PSTN 1/PSTN 2 or 3): System switch 16
bit 1
To Next Page
Loading...
