Message Cause Solution
"Some invalid destination(s)
contained. Do you want to
select only valid destination
(s)?"
The specified group contains
fax destinations, e-mail
destinations, and/or folder
destinations, either of which
are incompatible with the
specified transmission
method.
In the message that appears at each
transmission, press [Select].
"Some page(s) are near
blank. To cancel, press the
Stop key."
The first page of the document
is almost blank.
The original's blank side might have
been scanned. Be sure to place your
originals correctly. For details about
determining the cause of blank pages,
see "Detecting Blank Sheet", Facsimile
Reference .
"Some page(s) are near
blank."
The first page of the document
is almost blank.
The original's blank side might have
been scanned. Be sure to place your
originals correctly. For details about
determining the cause of blank pages,
see "Detecting Blank Sheet", Facsimile
Reference .
"The selected file(s)
contained file(s) without
access privileges. Only file
(s) with access privileges will
be deleted."
You tried to delete a document
for which you do not have
permission to delete.
Only the administrator can delete this
document. Contact the administrator if
you want to delete a document for which
you do not have permission to delete.
"Updating the destination
list... Please wait. Specified
destination(s) or sender's
name has been cleared."
The destination list is being
updated from the network
using SmartDeviceMonitor for
Admin or Web Image
Monitor.
Wait until the message disappears. Do
not switch off the power while this
message is displayed. Depending on the
number of destinations to be updated,
there may be some delay before you
can resume operation. Operation is not
possible while this message is displayed.
"You do not have the
privileges to use this
function."
The logged in user name does
not have permission for the
selected function.
Contact the administrator about the
permission for the required function.
3. Troubleshooting When Using the Facsimile Function
58