To Next PageTo Next PageWhy does my Ricoh Aficio MP C2030 crease copy paper?
Creased copy paper in your Ricoh All in One Printer can be caused by damp paper. Use paper that has been stored in the recommended temperature and humidity. The paper might also be too thin, so use recommended paper.
Why do white stripes appear on the OHP when using my Ricoh Aficio MP C2030 All in One Printer?
If white stripes appear on the OHP when using your Ricoh All in One Printer, it's likely due to fragments of paper stuck to the OHP. Use a dry cloth to wipe any paper fragments off the back of the OHP.
Why are images skewed on my Ricoh All in One Printer?
Skewed images from your Ricoh All in One Printer can be caused by improperly set side fences in the paper feed tray. Ensure the side fences are correctly adjusted. Additionally, the paper might be feeding in at a slant. Make sure to load the paper correctly.
Why is the reverse side of an original image copied on my Ricoh Aficio MP C2030 All in One Printer?
If the reverse side of an original image is being copied by your Ricoh All in One Printer, the image density is likely too high. Adjust the image density settings.
What to do if Ricoh Aficio MP C2030 All in One Printer cannot access the machine using ScanRouter EX Professional V3?
If you cannot access the Ricoh All in One Printer using ScanRouter EX Professional V3 / ScanRouter EX Enterprise V2, it could be because "Restrict Use of Simple Encryption" is not set correctly, or "SSL/TLS" has been enabled without the required certificate installed on the computer. Set "Restrict Use of Simple Encryption" to [On]. Alternatively, enable "SSL/TLS", install the server certificate in the machine, and then install the certificate in the computer.
Why I cannot combine several functions on my Ricoh Aficio MP C2030?
If you cannot combine several functions on your Ricoh All in One Printer, it's because the selected functions are not compatible. Check the combination of functions and make the settings again.
Why can't I print in duplex mode on my Ricoh Aficio MP C2030 All in One Printer?
There are several reasons why you might not be able to print in duplex mode on your Ricoh All in One Printer: * Paper is loaded on the bypass tray. Remove it and load paper in a different tray. * The loaded paper is thicker than 105 g/m2. Change the paper. * [Duplex] is set to [Off] for "Paper Type". Set [Duplex] to [On] in [Tray Paper Settings], under "Paper Type". * Duplex copying is not available if the paper type is set to [Thick Paper 2] or [Thick Paper 3]. Select a different paper type in [Tray Paper Settings]. * The originals are placed in the wrong orientation. Place the original in the correct orientation.
What to do if after starting 'User Management Tool' in SmartDeviceMonitor for Admin an incorrect password message appears on Ricoh Aficio MP C2030 All in One Printer?
If, after starting 'User Management Tool' or 'Address Management Tool' in SmartDeviceMonitor for Admin and entering the correct login user name and password, a message that an incorrect password has been entered appears on your Ricoh All in One Printer, it may be caused by the fact that 'Restrict Use of Simple Encryption' is not set correctly or 'SSL/TLS' has been enabled although the required certificate is not installed in the computer. Set 'Restrict Use of Simple Encryption' to [On]. Alternatively, enable 'SSL/TLS', install the server certificate in the machine, and then install the certificate in the computer.
Why Ricoh All in One Printer shows message 'You do not have the privileges to use this function'?
The message 'You do not have the privileges to use this function' on your Ricoh All in One Printer appears because the authority to use the function is not specified. If this appears when trying to use a function, the function is not specified in the Address Book management setting as being available. The user administrator must decide whether to authorize use of the function and then assign the authority. If this appears when trying to specify a default setting, the administrator differs depending on the default settings you wish to specify. Using the list of settings, the administrator responsible must decide whether to authorize use of the function.
What to do if Ricoh Aficio MP C2030 cannot print when user authentication has been specified?
If you cannot print when user authentication has been specified on your Ricoh All in One Printer, it might be because user authentication is not specified in the printer driver. Specify user authentication in the printer driver.
General| Brand | Ricoh |
|---|---|
| Model | Aficio MP C2030 |
| Category | All in One Printer |
| Language | English |
Verifies how the machine is connected before installing the printer driver.
Details network connection methods for using the printer.
Explains how local connections, primarily USB, can be established.
Provides instructions for installing the printer driver using various methods.
Explains how to access and configure printer properties for PCL drivers.
Details how to access and configure printer properties for RPCS drivers.
Configures black and white printing for specific document types.
Explains how to register classification codes for printer usage monitoring.
Embeds patterns/text to prevent unauthorized copying of documents.
Provides instructions to stop printing from the computer or control panel.
Explains how to check the error log on the control panel to identify causes of printing errors.
Explains printing on paper with fixed orientation or double-sided printing.
Explains the PictBridge standard for direct camera printing.
Explains how to print index sheets of photos from a digital camera.
Step-by-step guide on how to initiate and perform PictBridge printing.
Lists the various functions and capabilities available with PictBridge.
Provides solutions for common problems encountered during PictBridge printing.
Describes preparations and procedures for using the network TWAIN scanner.
Explains the network TWAIN scanner function and its sharing capabilities.
Outlines the essential steps to prepare the machine for network TWAIN scanning.
Explains how to specify original orientation and settings for mixed-size originals.
Provides instructions on how to access the User Tools menu for settings.
Explains how to modify the default settings of the printer.
Prevents unauthorized users from changing user tool settings by specifying protection levels.
Describes how to print configuration pages, error logs, and menu lists.
Details various system settings like Auto Continue, Duplex, and Blank Page Print.
Covers settings specific to the PCL printer language.
Details the electrical and hardware specifications of the machine and its options.
Explains resolution and scan size relationships for TWAIN scanning.
Lists the trademarks and registered trademarks associated with the product.
