113
3. Special Operations under
Windows
Printing Files Directly from Windows
You can print files directly using Windows commands. For example, you can
print PostScript files for PostScript 3.
❖ Windows 95/98/Me
You can print files directly using ftp command.
❖ Windows 2000/XP, Windows Server 2003, Windows NT 4.0
You can print files directly using lpr, rcp ftp command.
Setup
Follow the procedure below to make network environment settings.
A Enable TCP/IP with the control panel, and then set up the printer’s network
environment about TCP/IP including IP addresses.
TCP/IP of the printer is set as default.
B Install a TCP/IP in Windows to set up the network environment.
Consult the network administrator for the local setting information.
C To print under Windows 2000/XP, Windows Server 2003, install “Printing
service for UNIX” as the network application. To print under Windows NT
4.0, install “Microsoft TCP/IP printing” as the network application.
Reference
p.121 “Using DHCP”
To Next Page
Loading...
