Ricoh Aficio MP W3600 - Changing the Network Interface Board Configuration

Using SmartDeviceMonitor for Admin
41
2
Changing the Network Interface Board Configuration
Follow the procedure below to change the network interface board configuration
using SmartDeviceMonitor for Admin.
A Start SmartDeviceMonitor for Admin.
B On the [Group:] menu, point to [Search Device], and then click [IPv4], [IPX/SPX]
or [IPv4 SNMPv3].
A list of machines using the selected protocol appears.
Select the protocol of the machine whose configuration you want to change.
If you are using IPv4 SNMPv3, enter the user authentication.
C In the list, select a machine whose configuration you want to change.
D On the [Tools] menu, click [NIB Setup Tool].
NIB Setup Tool starts when the network interface board is default. Click [Web
browser], and then click [OK].
E A Web browser opens and enter the login user name and password, and then
click [Login].
For details about the login user name and password, consult your network
administrator.
F Configure settings using Web Image Monitor.
G Quit Web Image Monitor.
H Quit SmartDeviceMonitor for Admin.
Note
❒ For details about the login user name and password, see Security Reference.
Reference
For details about Web Image Monitor, see p.27 “Using Web Image Monitor”