Using NetWare
25
1
Setting Up as a Remote Printer (NetWare 4.x, 5 / 5.1, 6 / 6.5)
Follow the procedure below to use the printer as a remote printer under NetWare
4.x, 5 / 5.1 and 6 / 6.5.
Important
❒ To use the printer as a remote printer under NetWare 4.x, 5 / 5.1, 6 / 6.5, set it
to NDS mode.
❒ Do not use the printer as a remote printer when Pure IP is used.
Setting up using NWadmin
A From Windows, start NWadmin.
For details about NWadmin, see the NetWare manuals.
B
Set up the network connection to a print queue. Select the object in which the print
queue is located in the directory tree, and then click
[
Create
]
on the
[
Object
]
menu.
C In the [Class of new object] box, click [Print Queue], and then click [OK].
D In the [Print Queue Name] box, enter the name of the print queue.
E In the [Print Queue Volume] box, click [Browse].
F In the [Available objects] box, click the volume in which the print queue is
created, and then click [OK].
G Check the settings, and then click [Create].
H Set up the network connection to a printer. Select the object in which the
printer is located, and then click [Create] on the [Object] menu.
I In the [Class of new object] box, click [Printer], and then click [OK]. For NetWare
5, click [Printer (Non NDPS)].
J In the [Printer name] box, enter the printer name
K Select the [Define additional properties] check box, and then click [Create].
L Assign print queues to the created printer. Click [Assignments], and then
click [Add] in the [Assignments] area.
M In the [Available objects] box, click the queue you created, and then click [OK].
N Click [Configuration], click [Parallel] in the [Printer type] list, and then click
[Communication].
O Click [Manual load] in the [Communication type] area, and then click [OK].
Check the settings, and then click [OK].
P Set up the network connection to a print server. Select a context specified
using NIB Setup Tool, and then click [Create] on the [Object] menu.
Q In the [Class of new object] box, click [Print Server], and then click [OK]. For
NetWare 5, click [Print Sever (Non NDPS)].
R In the [Print Server Name:] box, enter the print server name.
Use the same print server name specified using NIB Setup Tool.
To Next Page
Loading...
