Ricoh Aficio MP W3600 - When User Authentication Is Set

Monitoring and Configuring the Printer
30
2
When user authentication is set
Login (using Web Image Monitor)
Follow the procedure below to log on when user authentication is set.
A Click [Login].
B Enter a login user name and password, and then click [Login].
For details about the login user name and password, consult your network
administrator.
Note
❒ For user code authentication, enter a user code in [User Name], and then click
[OK].
❒ The procedure may differ depending on the Web browser used.
Log Off (using Web Image Monitor)
Follow the procedure below to log on when user authentication is set.
Click [Logout] to log off.
Note
❒ After you log on and change configurations, make sure to always [Logout].