Using a Printer Server
18
1
Setting Up as a Print Server (NetWare 3.x)
Follow the procedure below to connect the machine as a print server using Net-
Ware 3.x.
A Open a Web browser, and then enter "http://(printer's address)/" in the address
bar. Top Page of Web Image Monitor appears.
B Click [Login].
A dialog box for entering the login user name and password appears.
C Enter the login user name and password, and then click [Login].
For details about the login user name and password, consult your network
administrator.
D Click [Configuration] in the left area, and then click [NetWare].
• Print Server Name: Enter the NetWare print server name. To use the interface
board as a print server, enter the name of a print server that is not active on the
file server. Use up to 47 characters.
• Logon Mode: Specify whether to designate a file server or NDS tree when
logging on to NetWare.
• File Server Name: When a file server name is entered here, only the specified
file server is searched for. This item is mandatory. Use up to 47 characters.
• NDS Tree: To enable NDS mode, enter the name of the NDS tree you want
to log on to. Use up to 32 alphanumeric characters.
• NDS Context Name: To enable NDS mode, enter the print server context.
Use up to 127 characters.
• Operation Mode: Specify whether to use the interface board as a print server
or a remote printer.
• Remote Printer No.: This item is effective when the interface board is specified
as a remote printer. Enter the same number as the number of the printer to be
created on the print server (0 to 254 characters).
• Job Timeout: When the interface board is used as a NetWare remote printer,
the printer cannot detect when a print job ends. Therefore, the printer termi-
nates printing when a certain period of time has elapsed since it last received
print data (i.e., when it has not received print data for a certain period of
time). Specify here this period of time (3 to 255 seconds). The initial value is
15 (seconds).
• Frame Type: Select the frame type from the drop-down menu.
• Print Server Protocol: Select the protocol for NetWare from the drop-down
menu.
• NCP Delivery Protocol: Select the protocol for NCP delivery.
To Next Page
Loading...
