Monitoring and Configuring the Printer
50
2
Changing Names and Comments
Follow the procedure below to change the names and comments of the machine.
A Start SmartDeviceMonitor for Admin.
B On the [Group:] menu, point to [Search Device], and then click [IPv4], [IPX/SPX]
or [IPv4 SNMPv3].
A list of machines using the selected protocol appears.
Select the protocol of the machine whose configuration you want to change.
If you are using IPv4 SNMPv3, enter the user authentication.
C Select a machine in the list, and then click [NIB Setup Tool] on the [Tools] menu.
NIB Setup Tool starts when the network interface board is default. Click [Web
browser], and then click [OK].
D A Web browser opens and enter the login user name and password, and
then click [Login].
For details about the login user name and password, consult your network
administrator.
E Click [Configuration].
F Click [System] on the [Device Settings] area, and then change the settings.
G Quit Web Image Monitor.
H Quit SmartDeviceMonitor for Admin.
Note
❒ In the [Device Name] box, enter a device name on the machine using up to 31
characters.
❒ In the [Comment] box, enter a comment on the machine using up to 31 char-
acters.
❒ For details about the login user name and password, see Security Reference.
To Next Page
Loading...
