Using a Printer Server
20
1
Setting Up as a Print Server (NetWare 4.x, 5 / 5.1, 6 / 6.5)
Follow the procedure below to connect the machine as a print server using Net-
Ware 4.x, NetWare 5 / 5.1, or NetWare 6 / 6.5.
Important
❒ When using the printer as a print server in NetWare 4.x, NetWare 5 / 5.1, or
NetWare 6 / 6.5, set it to the NDS mode.
❒ When using NetWare 5 / 5.1 or NetWare 6 / 6.5, set the printer as a print server.
A Open a Web browser, and then enter "http://(printer's address)/" in the ad-
dress bar. Top Page of Web Image Monitor appears.
B Click [Login].
A dialog box for entering the login user name and password appears.
C Enter the login user name and password, and then click [Login].
For details about the login user name and password, consult your network
administrator.
D Click [Configuration] in the left area, and then click [NetWare].
E Confirm the settings, and then click [OK].
Configuration is now complete. Wait several minutes before restarting Web
Image Monitor.
F Click [Logout].
Note
❒ To check the configuration is correct, enter the following from the command
prompt:
F:> USERLIST
❒ If the printer works as configured, the name of the print server appears as
a connected user.
❒ If you cannot identify the printer you want to configure, check the printer
name against the configuration page printed from the printer. For details
about printing a configuration page, see Printer Reference.
❒ If no printer names appear in the list, match the frame types of IPX/SPXs
for the computer and printer. Use the [Network] dialog box of Windows to
change the frame type of the computer.
❒ For details about the login user name and password, see Security Reference.
To Next Page
Loading...
