Using SmartDeviceMonitor for Admin
43
2
Changing the Paper Type
Follow the procedure below to change the paper type.
A Start SmartDeviceMonitor for Admin.
B On the [Group:] menu, point to [Search Device], and then click [IPv4], [IPX/SPX]
or [IPv4 SNMPv3].
A list of machines using the selected protocol appears.
Select the protocol of the machine whose configuration you want to change.
If you are using IPv4 SNMPv3, enter the user authentication.
C In the list, select a machine whose configuration you want to change.
D On the [Tools] menu, point to [Device Settings], and then click [System].
A Web browser opens and the window for entering the login user name and
password for the Web Image Monitor administrator appears.
E Enter the login user name and password, and then click [Login].
For details about the login user name and password, consult your network
administrator.
The [Paper] page appears.
Select a paper type in the [Paper Type] list for each tray. Enter required setting
items.
F Quit Web Image Monitor.
G Quit SmartDeviceMonitor for Admin.
Note
❒ For details about setting items, see Help in the [General Settings] on [Config-
uration] page.
❒ For details about the login user name and password, see Security Reference.
To Next Page
Loading...
