Monitoring and Configuring the Printer
46
2
Restricting Functions
Follow the procedure below to restrict use of individual functions.
A Start SmartDeviceMonitor for Admin User Management Tool.
B Click the [User Counter Information] tab of User Management Tool.
C Click the user whose functions you want to restrict.
D On the [Edit] menu of User Management Tool, click [Restrict Access To Device].
E Select the check box of the functions you want to restrict.
F Click [OK].
A confirmation message appears.
G Click [Yes].
The settings are applied.
Setting Applicable Functions to New Users
Follow the procedure below to add new users and set functions applicable to them.
A Start SmartDeviceMonitor for Admin User Management Tool.
B Click the [Access Control List] tab of User Management Tool.
C On the [Edit] menu, click [Add New User].
D Enter the user code and user name.
E Select the check box of the functions applicable to the new user.
If the check boxes are unavailable, there is no restriction to use that function.
F Click [OK].
The new user is added.
G On the [Edit] menu, click [Apply Settings].
The settings are applied.
H Click [Exit] on the [File] menu to quit User Management Tool.
Note
❒ For details about setting restrictions, see SmartDeviceMonitor for Admin
Help.
To Next Page
Loading...
