Controller Board Slots
D383 2 SM
Board Slots
No. Name Description
ISDN
Jack for ISDN connection (Japan Only)
Line 3 Not used. (G4 is not available for installation outside
Japan at this time.)
Line 1 Jack for the main telephone line from the outside for
connection to Fax Option (D361).
TEL1 Jack for telephone connection
Line 2 Jack for a 2nd line connection to the Fax Interface Unit
(D361) (G3) when this option is installed.
Board Slot Optional interface boards are installed here.
SD Card Slot 1 For options provided on SD cards. The application SD
card (with the exception of the HDD Encryption unit or VM
SD card) should be installed in Slot 1. If more than one
application is to be used, move the applications to the
same SD card with SP5873.
SD Card Slot 2 For options provided on SD cards and servicing. The
HDD Encryption unit SD card and VM card must be
installed in Slot 2.
USB-B Built-in for connection of USB devices (USB 2.0)
Ethernet Standard LAN connection point. 100BaseT LAN
Green LED Lights when the network is connected and operating.
Orange LED Indicates the current transmission speed:
ON: 100Base
OFF: 10Base
Only two SD Card slots are available for applications.
To install more applications, they must be moved onto one SD Card. (See 1.2.4 Printer,
Scanner Enhance Options for specific instructions)
To Next Page
Loading...
