Fax Communication Features 
D361 174  SM 
compresses the data in MMR (by software) to store it in the HDD. If image rotation will be 
done, the image is rotated in the page memory before compression. 
For transmission, the stored image data is transferred to the FCU. The FCU decompresses 
the image data, then recompresses and/or reduces the data if necessary for transmission. 
The NCU transmits the data to the line. 
The documents can be stored in the HDD (Document Server) from the fax application. The 
stored documents in the document sever can be used for the fax transmission in many 
times. More than one document and the scanned document can be combined into one file 
and then the file can be transmitted.   
  When using the document server, the SAF memory is not used. 
  The document is compressed with MMR and stored. 
  Up to 9,000 pages can be stored (1 file: Up to 1,000 pages) from the fax application. 
  Only stored documents from the fax application can be transmitted. 
  Scanned documents are given a name automatically, such as “FAX001”. But it is 
possible to change the file name, user name and password. 
  Up to 30 files can be selected at once. 
 
  The compression method of the fax application is different from the copy 
application. The storing time is longer than the copier storing. 
  When selecting “Print 1st page”, the stored document will be reduced to A4 size. 
5.4.3 INTERNET MAIL COMMUNICATION 
Mail Transmission 
T.37 simple and full modes 
This machine supports T.37 full mode. (ITU-RFC232). The difference between T.37 simple 
mode and full mode is as follows. 
 
Function  T.37 Simple Mode  T.37 Full Mode 
Resolution 
200 x 100 
200 x 200 
200 x100 
200 x 200 
200 x 400 
400 x 400 (if available) 
RX Paper Width  A4  A4, B4, A3 
RX Data Compression Method  MH  MH (default), MR, MMR,