1000-Sheet Finisher (B408)
D017/D018/D019/D020 1-46 SM
1.12.2 INSTALLATION PROCEDURE
Unplug the main machine power cord before starting the following procedure.
The following options must be installed before you install this finisher:
Bridge Unit (D368)
Paper Tray Unit (D331) or LCT (B391)
1. Unpack the finisher and remove the tapes.
Be sure to keep screw [A]. It will be needed to secure the grounding plate in
step 4.
2. Install the front joint bracket [A] ( x 2; M4 x 17) and rear joint bracket [B] ( x 1; M4 x
17).
3. Remove the left stand [C] ( x 3).
To Next Page
Loading...
