Paper Feed
SM 6-55 D017/D018/D019/D020
Detailed
Descriptions
6.11.6 SIDE AND END FENCES
Side Fences
If the tray is pushed in forcefully when it is full, the fences may warp or bend. This can
cause paper skew or incorrect side-to-side registration. To prevent this problem, each side
fence has a stopper [A]. Each side fence can be secured with a screw [B], for customers
who do not want to change the paper size.
End Fence
When the amount of paper in the tray decreases, the bottom plate [C] lifts gradually. The
end fence [D] is connected to the bottom plate. When the tray bottom plate rises, the end
fence moves forward and pushes the back of the paper stack to keep it straight.
To Next Page
Loading...
