Scanner Service Tables
SM 5 D383
Printer/
Scanner
Option
D383
2.2 SCANNER SERVICE TABLES
SP Number/Name Function/[Setting]
1004 Compression Type
Selects the compression type for binary
picture processing.
[1-3/1/1]
1: MH, 2: MR, 3: MMR
1005 Erase Margin
Creates an erase margin for all edges of
the scanned image.
If the machine has scanned the edge of
the original, create a margin.
[0 – 5/0/1mm]
1009 Forbid Using TWAIN
Sets the system not to use the network
TWAIN scanner driver.
0: Not forbidden (can use TWAIN)
1: Forbid using TWAIN driver.
SP Number/Name Function/[Setting]
Compression level (grayscale)
2021
These SP codes set the compression ratio for the grayscale processing mode
that can be selected with the notch settings on the operation panel.
Range: 5 (lowest ratio) to 95 (highest ratio)
2021 1 Level 3 (Middle I-Qual) [5~95/40/1/step]
2021 2 Level 2 (High I-Qual) [5~95/50/1/step]
2021 3 Level 4 (Low I-Qual) [5~95/30/1/step]
2021 4 Level 1 (Highest I-Qual) [5~95/60/1/step]
2021 5 Level 5 (Lowest I-Qual) [5~95/20/1/step]
To Next Page
Loading...
