Paper Feed
SM 3-47 D017/D018/D019/D020
Replacement
and
Adjustment
2. Release the rear link [B] from the right cover ( x 1).
3. Release the front link [C] from the mainframe.
4. Remove the right cover [D].
If the duplex unit is installed:
1. Disconnect the right hinge [A] ( x1)
2. Remove the connector cap [B] ( x1).
3. Disconnect the duplex unit harness [C] ( x1).
4. Disconnect the arm [A], then disconnect the snap hinges [B] and [C].
To Next Page
Loading...
