SP1xxx: Feed
SM 5-15 D017/D018/D019/D020
Service
Tables
5 Thick Paper – Roller Ends
for thick paper for the 2nd paper tray and
for the bypass tray.
[0 to 30 / 15 / 1°C/step]
6 After Warming-up - Center
Adjusts the fusing temperature at the
center of the hot roller after the machine
has warmed up.
[120 to 200 / 180 / 1°C/step]
7 After Warming-up - Ends
Adjusts the fusing temperature at both
ends of the hot roller after the machine
has warmed up.
[120 to 200 / 185 / 1°C/step]
8
After Warming-up - No. of
Pages
In this machine, fusing temperature is kept
10°C higher than the normal temperature
for a number of pages after the machine
has warmed up. This SP selects the
number of pages made at this
temperature. See Detailed Section
Descriptions – Fusing for more details.
[0 to 10 / 3 / 1 page/step]
9 After Warming-up - Time
In this machine, fusing temperature is kept
10°C higher than the normal temperature
for a short while after the machine warms
up. This SP selects the length of time that
this temperature is used. See Detailed
Section Descriptions – Fusing for more
details.
[0 to 180 / 60 / 1s/step]
10 Wait Temp: Center Minus
11 Wait Temp: Ends Minus
1106 Fusing Temperature Display
To Next Page
Loading...
