Ricoh Aficio MP2550B - Page 325

SP4xxx: Scanner
SM 5-61 D017/D018/D019/D020
Service
Tables
Black Level 2: Rough Adjustment Display
4673
RE: Red Even signal, RO: Red Odd signal
1
Factory Setting:
RE Color
Displays the factory setting values of the black level
adjustment for the even red signal in the CCD circuit
board (color printing speed)..
[0 to 255 / 112 / 1 digit/step]
2
Factory Setting:
RO Color
Displays the factory setting values of the black level
adjustment (rough adjustment) for the odd red signal in
the CCD circuit board (color printing speed).
3
Factory Setting:
RE Color
Displays the factory setting values of the black level
adjustment (fine adjustment) for the even red signal in
the CCD circuit board (color printing speed).
[0 to 255 / 128 / 1 digit/step]
4
Factory Setting:
RO Color
Displays the factory setting values of the black level
adjustment (fine adjustment) for the odd red signal in the
CCD circuit board (color printing speed).
5
Factory Setting:
RE BW
Displays the factory setting values of the black level
adjustment (rough adjustment) for the even red signal in
the CCD circuit board (black and white printing speed).
[0 to 255 / 112 / 1 digit/step]
6
Factory Setting:
RO BW
Displays the factory setting values of the black level
adjustment (rough adjustment) for the odd red signal in
the CCD circuit board (black and white printing speed).
7
Factory Setting:
RE BW
Displays the factory setting values of the black level
adjustment (fine adjustment) for the even red signal in
the CCD circuit board (black and white printing speed).
[0 to 255 / 128 / 1 digit/step]
8
Factory Setting:
RO BW
Displays the factory setting values of the black level
adjustment (fine adjustment) for the odd red signal in the
CCD circuit board (black and white printing speed).