SP5xxx: Mode
D017/D018/D019/D020 5-134 SM
with WIM are encrypted when they are
transmitted by an e-mail.
[0 to 1 / 0 / 1]
0: Not encrypted, 1:Encryption
200 Detect Mem Leak
201 DocSvr Timeout
Farm (Firmware) Update Procedure
5886*
This SP determines whether the ROM can be updated remotely.
[0 or 1 / 0 / 1 step]
0: ON, 1: OFF
Personal Information Protect
5888*
Selects the protection level for logs.
[0 to 1 / 0 / 1}
0: No authentication, No protection for logs
1: No authentication, Protected logs (an administrator can see the logs)
Plug & Play Maker/Model Name
5907
Selects the brand name and the production name for Windows Plug & Play.
This information is stored in the NVRAM. If the NVRAM is defective, these
names should be registered again.
After selecting, press the “Original Type” key and “#” key at the same time.
When the setting is completed, the beeper sounds five times.
LCT Paper Size
5908*
Selects the paper size for the LCT. Use this SP after changing the paper size in
the optional LCT (i.e., after changing the side plate position for the LCT).
[0 to 1 / 1 / 1] North America
0: A4
To Next Page
Loading...
