SP8xxx: Data Log 2
D017/D018/D019/D020 5-186 SM
Scan PGS/Mode [0 to 9999999/ 0 / 1]
8231
These SPs count the number of pages scanned by each ADF mode to
determine the work load on the ADF.
1 Large Volume
Selectable. Large copy jobs that cannot be loaded
in the ADF at one time.
2 SADF
Selectable. Feeding pages one by one through the
ADF.
3 Mixed Size
Selectable. Select “Mixed Sizes” on the operation
panel.
4 Custom Size Selectable. Originals of non-standard size.
5 Platen
Book mode. Raising the ADF and placing the
original directly on the platen.
6 Simplex/Duplex Single-side, double-side scanning.
If the scan mode is changed during the job, for example, if the user switches from ADF
to Platen mode, the count is done for the last selected mode.
The user cannot select mixed sizes or non-standard sizes with the fax application so if
the original’s page sizes are mixed or non-standard, these are not counted.
If the user selects “Mixed Sizes” for copying in the platen mode, the Mixed Size count
is enabled.
In the SADF mode if the user copies 1 page in platen mode and then copies 2 pages
with SADF, the Platen count is 1 and the SADF count is 3.
T:Scan PGS/Org [0 to 9999999/ 0 / 1]
8241
These SPs count the total number of scanned pages by original type for
all jobs, regardless of which application was used.
C:Scan PGS/Org [0 to 9999999/ 0 / 1]
8242
These SPs count the number of pages scanned by original type for
Copy jobs.
To Next Page
Loading...
