SP8xxx: Data Log 2
SM 5-191 D017/D018/D019/D020
Service
Tables
8387 O:Total PrtPGS mode screen go to the C: counter.
When the A3/DLT double count function is switched on with SP5104, 1 A3/DLT page is
counted as 2.
When several documents are merged for a print job, the number of pages stored are
counted for the application that stored them.
These counters are used primarily to calculate charges on use of the machine, so the
following pages are not counted as printed pages:
- Blank pages in a duplex printing job.
- Blank pages inserted as document covers, chapter title sheets, and slip sheets.
- Reports printed to confirm counts.
- All reports done in the service mode (service summaries, engine maintenance reports,
etc.)
- Test prints for machine image adjustment.
- Error notification reports.
- Partially printed pages as the result of a copier jam.
LSize PrtPGS [0 to 9999999/ 0 / 1]
8391
These SPs count pages printed on paper sizes A3/DLT and larger.
Note: In addition to being displayed in the SMC Report, These counters
appear in the SMC report as well as on the machine display.
8401 T:PrtPGS/LS
8402 C:PrtPGS/LS
8403 F:PrtPGS/LS
8404 P:PrtPGS/LS
8405 S:PrtPGS/LS
8406 L:PrtPGS/LS
These SPs count the number of pages printed
from the document server. The counter for the
application used to print the pages is
incremented.
The L: counter counts the number of jobs stored
from within the document server mode screen
at the operation panel.
[0 to 9999999/ 0 / 1]
Print jobs done with Web Image Monitor and Desk Top Binder are added to the L:
count.
To Next Page
Loading...
