Installation
D361 6 SM
One G3 Unit
1. Connect the G3 interface unit [A] and CCUIF [B] (edge connector).
Fasten the connected G3/CCUIF to the cover [C].
G3: ( x2)
CCUIF ( x4)
2. Connect the FCU [D] and CCUIF [B] (FFC x1).
3. Reconnect the speaker harness [E] ( x1)
Two G3 Units
1. Connect the G3 interface units [A] and [B] to the CCUIF [C] (edge connector).
Fasten the connected G3/CCUIF to the cover [D].
G3: ( x2 ea.)
To Next Page
Loading...
