Ricoh Aficio MP2550B - Page 753

Error Codes
SM 19 D361
Fax Option
Type 3350
D361
Code Meaning Suggested Cause/Action
(default) times within the
same ECM frame.
2-11
Only one V.21
connection flag was
received
 Replace the FCU.
2-12 Modem clock irregularity  Replace the FCU.
2-13 Modem initialization error
 Turn off the machine, then turn it back on.
 Update the modem ROM.
 Replace the FCU.
2-23
JBIG compression or
reconstruction error
 Turn off the machine, then turn it back on.
 Replace the EXFUNC board if the error is
frequent.
2-24 JBIG ASIC error
 Turn off the machine, then turn it back on.
 Replace the EXFUNC board if the error is
frequent.
2-25
JBIG data reconstruction
error (BIH error)
2-26
JBIG data reconstruction
error (Float marker error)
2-27
JBIG data reconstruction
error (End marker error)
2-28
JBIG data reconstruction
error (Timeout)
 JBIG data error
 Check the sender’s JBIG function.
 Update the MBU ROM.
2-29
JBIG trailing edge maker
error
 FCU defective
 Check the destination device.
2-50
The machine resets itself
for a fatal FCU system
error
 If this is frequent, update the ROM, or replace
the FCU.