Bit Switches
D361 64 SM
System Switch 0E (SP No. 1-101-015)
No Function Comments
3
Action when the external
handset goes off-hook
0: Manual tx and rx operation
1: Memory tx and rx operation
(the display remains the same)
0: Manual tx and rx are possible while the external
handset is off-hook. However, memory tx is not
possible.
1: The display stays in standby mode even when
the external handset is used, so that other people
can use the machine for memory tx operation. Note
that manual tx and rx are not possible with this
setting.
4-7 Not used Do not change these settings.
To Next Page
Loading...
