Bit Switches
D361 66 SM
System Switch 10 (SP No. 1-101-017)
No Function Comments
0-7
Threshold memory level for
parallel memory transmission
Threshold = N x 128 KB + 256 KB
N can be between 00 - FF(H)
Default setting: 02(H) = 512 KB
System Switch 11 (SP No. 1-101-018)
No Function Comments
0
TTI printing position
0: Superimposed on the page
data
1: Printed before the data
leading edge
Change this bit to 1 if the TTI overprints information
that the customer considers to be important (G3
transmissions).
1
TSI (G3) printing position
0: Superimposed on the page
data
1: Printed before the data
leading edge
Change this bit to 1 if the TSI (G3) overprints
information that the customer considers to be
important.
2 Not used Do not change the factory settings.
3
TTI used for broadcasting
0: The TTIs selected for each
Quick/Speed dial are used
1: The same TTI is used for all
destinations
1: The TTI (TTI_1 or TTI_2) which is selected for all
destinations during broadcasting.
4-7 Not used Do not change the factory settings.
To Next Page
Loading...
