Bit Switches
D361 80 SM
I-fax Switch 07 - Not used (do not change the settings)
I-fax Switch 08 (SP No. 1-102-009)
No Function Comments
Memory Threshold for POP Mail Reception
0-7
This setting determines the amount of SAF (Store and Forward) memory. (SAF
stores fax messages to send later for transmission to more than one location, and
also holds incoming messages if they cannot be printed.) When the amount of
SAF memory available falls below this setting, mail can no longer be received;
received mail is then stored on the mail server.
00-FF (0 to 1024 KB: HEX)
The hexadecimal number you enter is multiplied by 4 KB to determine the amount
of memory.
I-fax Switch 09 (SP No. 1-102-010)
No Function Comments
0-3 Not used Do not change the settings
4-7 Restrict TX Retries
This setting determines the number of retries
when connection and transmission fails due to
errors.
01-F (1-15 Hex)
I-fax Switch 0A - Not used (do not change the settings)
I-fax Switch 0B - Not used (do not change the settings)
I-fax Switch 0C - Not used (do not change the settings)
I-fax Switch 0D - Not used (do not change the settings)
I-fax Switch 0E - Not used (do not change the settings)
To Next Page
Loading...
Need help?
General