BASIC OPERATION
D367 4 SM
2. DETAILED SECTION DESCRIPTIONS
2.1 BASIC OPERATION
At the appropriate time after the leading edge of the first sheet of copy paper
reaches the copier’s registration roller, the junction gate solenoid [B] in the
interchange unit turns on to switch the junction gate to direct the paper to the tray
[C].
The junction gate solenoid turns off at the appropriate time after the paper is
directed to the tray. The main motor in the copier stops after the final sheet passes
through the paper sensor [E].
The paper sensor [E] turns on when there is paper in the tray, and the paper
indicator [F] turns on.
The tray can be opened for easier jam removal by swinging the tray to the left.
B413D101.WMF
B413D103.WMF
B413D102.WMF
[B]
[C]
[E]
[E]
[F]
To Next Page
Loading...
