Error Messages 
M018/M019 3-2 SM Appendix 
 
Waste Toner Bottle Set Error 
  Waste toner bottle not set   
  Disconnected or defective harness of the waste toner bottle set sensor 
  Defective waste toner bottle set sensor 
014 
1.  Install the waste toner bottle. 
2.  Check or replace the harness of the waste toner bottle set sensor. 
3.  Replace the waste toner bottle set sensor. 
 
Tray/Paper Selection Error 
  No paper in the tray or tray not set in the machine 
  Paper size requested by the job does not match the paper in the tray   
030 
1.  Install the tray or put the correct size paper in the tray. 
2.  Check the paper setting in the user menu mode. 
 
Paper Selection Error: Feed and Exit 
  Paper size requested by the job does not match the paper in the tray   
  Selection error for the paper feed and paper exit location in duplex mode   
031 
Check the paper feed and exit location in the user menu mode. 
 
Jam Error: No Feed from Tray 1   
 Paper slipped  
050 
Remove the paper jam at tray 1. 
 
Jam Error: No Feed from Optional Tray 
 Paper slipped  
052 
Remove the paper jam at the optional tray (Tray 2). 
 
http://www.manuals4you.com