Paper Transfer 
M018/M019 4-30  SM 
4.7.3 REGISTRATION ROLLER 
1.  Transfer unit ( p.4-27) 
2.  Transfer roller unit ( p.4-28) 
 
3. Tension springs [A] (both sides)   
4.  Registration idle roller [B] (   x 2, gear x 1, bushing x 2) 
5.  Registration roller [C] (
  x 2, gear x 2, bushing x 2) 
Reassembling the registration roller unit 
 
When installing the tension spring, make sure that the tension spring correctly hooks onto 
the bushing of the registration idle roller as shown above [A]. 
http://www.manuals4you.com