Ricoh Aficio SP C231SF User Manual

Getting Started
38
2
B Turn the power switch to ”aOn”.
The {Copy} key on the control panel lights up.
Note
❒ Depending on the [Default Mode] setting under [Admin Settings], the {Facsim-
ile} key may light up instead of the {Copy} key.
❒ The machine may make a noise while initializing. This noise does not indi-
cate a malfunction.
❒ To turn off the power, turn the power switch to “b Off”.
Reference
For details about [Default Mode], see p.231 “Administrator Settings”.
Initial Setup
When you turn on the machine for the first time, a menu for configuring the set-
tings described below will appear on the display. This section describes how to
complete the Initial Setup.
Important
❒ : The fax number code is required by international law. You can-
not legally connect a fax machine to the telephone system if the fax number
code is not programmed. Also, the fax header code and the date and time of
transmission must be included in the header of all pages faxed to, from, or
within the United States.
BAA041S
BAA038S

Ricoh Aficio SP C231SF Specifications