Electrical Components
SM 4-59 M018/M019
Replacement
&
Adjustment
The default setting is "OFF". Select "ON" only if the customer wants to use this
feature.
17. Select "Registration", and then adjust the registration for each direction (vertical and
horizontal direction) and tray if necessary.
18. Select "2nd Transfer Fuser Temp", and then adjust the transfer roller bias and the
temperature reduction of the fusing unit for each paper type and for the front and back
sides. The default settings for normal operation are all '0'.
19. Exit "Engine Maintenance".
PnP Name (Plug and Play) Procedure
Set the PnP name as follows when replacing the EEPROM of the MF version.
0xAB
A indicates the brand. B indicates the model.
A: Brand
Brand 0 1 2 3 4 5 6 7
Name Not used RICOH Gestetner Not used LANIER NRG Savin Generic
B: Model
Brand Ricoh: 1
Gestetner, LANIER,
NRG, Savin: A= 2, 4, 5,
or 6
Generic:7
Model 0ｘ00 0ｘ11 0ｘ12 0ｘ13
0ｘ
A4
0ｘA5 0ｘA6 0ｘ77 0ｘ78 0ｘ79
Name
not
used
not
used
Aficio
SP
C231SF
Aficio
SP
C232SF
not
used
SP
C231SF
SP
C232SF
not
used
C231SF C232SF
Brand ID: 0x01 (default)
This ID is not related to the PnP Brand name. Do not change the setting; otherwise, a
malfunction may occur.
Maintenance ID: 0x00 (default)
Do not change the setting; otherwise, a malfunction may occur.
LSU Adjustment
Input the data using the number keys. The cursor can be moved to the right or the left with
the Down arrow or the Up arrow keys. You can change the alphanumeric characters by
repeatedly pressing the number keys (like a mobile phone). (Example: 2 Æ a Æ b Æ c)
There is no “back space” function. If you input incorrect data, you have to delete all the data
input by pressing the Clear/Stop key. Then, input the LSU data again.
Rev. 02/03/2010
⇒
http://www.manuals4you.com
To Next Page
Loading...
